
Serging:
I just figured out how to serge around tight inside and outside curves. I won't lie to you though it takes a lot of practice. Don't expect it to happen overnight. If you are new to serging first practice doing outside curves. these are easy once you get the hang of it. Make sure that you are watching both where you're stitching and where your cutting blade is. GO SLOW at first and then speed up when you feel comfortable. Next get some cheap flannel (I found some in the as is section because it frayed easily, you can also use old tshirts or scaps) cut out your pad shape x 2 pieces. Start at one of the outside curves and as you near the inside curve pull your fabric away from the cutting blade (almost as if you are sewing straight) go really slow here and if needed lift the presser foot to reposition the fabric if you need to. Keep this up until done. It does take practice so don't be upset if you don't get it right off the bat. Hope this helps others!
No comments:
Post a Comment